Epoxy Rebar Anchoring Adhesive

For 18 years, JUN TENG has specialized in the formulation and production of structural anchoring adhesives. Unlike repackagers who purchase and resell bulk compounds, we control every step—from epoxy resin synthesis to final batch testing—at our own chemical facility. Every batch of Epoxy Rebar Anchoring Adhesive is manufactured under strict quality control and verified by third-party testing, ensuring reliable anchorage performance in both dry and damp hole conditions.

Comparison Table of Core Performance Parameters of Products

Our core strengths

1. High thixotropy non flowing adhesive reduces material waste. Epoxy Rebar Anchoring Adhesive is specifically designed for top planting reinforcement and vertical deep hole optimization of adhesive viscosity, inverted drilling construction will not cause adhesive to flow down, block reinforcement, or pollute the base surface. The same construction area uses 15% less material than ordinary sparse planting adhesive, reducing construction material costs.

2. Dual adaptation of dry and wet holes, construction is not limited by weather conditions, and there is no need to dry the drilled holes with accumulated water. The wet holes washed with clean water can be directly filled with glue and planted with reinforcement, eliminating the need for a hair dryer drying process. Construction can be carried out normally in rainy days and damp basement environments, greatly reducing the construction period of the site.

3. Long term anti-aging, stable anchorage life matching the modified epoxy molecular structure of the main body of the building, isolated from water vapor, ultraviolet ray, acid and alkali erosion, no shrinkage gap after curing, and the service life of planted bar anchorage can reach more than 30 years, avoiding rework and maintenance in the later period.

4. Flexible procurement with free samples for pull-out testing—factory stock available in 5kg and 20kg standard pails. Bulk orders enjoy tiered pricing; small repairs can order as little as one pail. Free samples allow you to conduct your own pull-out tests before committing to bulk purchase.

Application scope

1. Secondary structure of building construction: wall tie bars, beam column enlarged section planting bars, floor reinforcement embedded steel bars;
2. Curtain wall steel structure: external wall stone curtain wall, glass curtain wall chemical anchor bolt anchoring and fixing;

3. Municipal road and bridge engineering: reinforcement of bridge piers and columns, pre embedded steel bars for guardrails, reinforcement and planting of steel bars for culverts;

4. Underground damp engineering: anchoring of damp holes in basement roof, sewage tank, and civil air defense engineering;

5. Factory renovation project: Pre embedding of equipment foundation screws, reinforcement of steel structure columns, and planting of steel bars. This product is suitable for concrete, granite, and dense red brick base surfaces. For loose sandblasted walls, repair glue should be used in advance to level the inner wall of the borehole to ensure anchoring effect.

Standardized Reinforcement Planting Construction Process

1. Drilling cleaning: Drill holes according to the designed aperture and depth, and use a brush in conjunction with an air cylinder to clean the dust inside the holes;
2. Cleaning the holes: Rinse the holes with clean water without completely drying them, and keep them slightly damp without affecting their performance;

3. Mixing colloids: Mix A and B colloids at a constant speed in a 2:1 ratio for 3 minutes until the color is completely uniform;

4. Channel injection: Inject glue uniformly from the bottom of the hole outward to ensure that the hole is fully filled with glue;

5. Inserting steel bars: Rotate and insert threaded steel bars, and a small amount of glue will overflow from the hole to meet the filling standards;

6. Static curing: The initial anchorage strength is achieved within 24 hours at room temperature, and it can bear weight after 72 hours of complete curing.

Why choose JUN TENG?

We operate an independent testing laboratory for anchoring materials, conducting tests in strict accordance with two mandatory national standards: *GB 50367 (Code for Design of Strengthening Concrete Structure)* and *JGJ145 (Technical Specification for Post-installed Anchors in Concrete Structures)*. After production, each batch of epoxy rebar anchoring adhesive undergoes random sampling for rebar pull-out tests, comparative testing in dry vs. wet holes, and resistance tests for temperature, acid/alkali exposure, and aging. We provide certificates of conformity and authoritative third-party test reports for every batch, offering a one-stop solution for the documentation required in municipal, school, and state-owned infrastructure project tenders.

For years, we have supplied products to thousands of structural reinforcement firms, curtain wall installers, and general contractors, supporting thousands of successful rebar anchoring projects. Applications range from anchoring in damp basements and embedding rebar in viaducts to secondary structural anchoring in office buildings and fixing curtain wall anchors. Tens of thousands of on-site pull-out tests have verified the stability of our anchoring strength; our products ensure long-term reliability without issues such as rebar detachment, hollow spots, or adhesive powdering, fully meeting the rigorous requirements for engineering acceptance.

Factory after-sales and technical support section

JUN TENG, as an 18 year source reinforcement material factory, refuses to accept low-priced and low-quality recycled raw materials, and traces the entire process of each batch of products. All Epoxy Rebar Anchoring Adhesive shipments come with copies of product qualification certificates and testing reports. For large engineering orders, a complete set of 1products should be stored in a cool and dry place with a shelf life of 12 months. After procurement, if there are various problems encountered during construction, such as mix ratio, hole depth and diameter matching, substandard drawing, and glue flow, our professional anchoring technical engineers will provide one-on-one free online guidance. They can provide estimates of reinforcement materials and key construction technical solutions based on construction drawings. Long term cooperative customers have stable supply without shortage, transparent prices, and no middleman markup.

For 18 years, JUN TENG has been a reliable source factory for structural reinforcement materials. Every batch of Epoxy Rebar Anchoring Adhesive is shipped with factory certificates and third-party test reports. Bulk orders can receive a full set of electronic bidding documents upon request. Store unopened in a cool, dry place for up to 12 months.

Our technical engineers provide free one-on-one online support for any construction issues—including mix ratio, hole depth and diameter matching, pull-out test failures, and glue flow problems. We can also offer material estimates and key construction solutions based on your structural drawings. Long-term customers benefit from stable supply, transparent pricing, and no middleman markups.